Can Hoverboards Get Wet?

Like any motor in any motorized vehicle, hoverboards can be negatively impacted when it comes in contact with water. In this guide, we’ll explore what you should do if your hoverboard does get wet and how you can protect it from getting wet in the future.

Can Hoverboard get damaged when it gets wet?

It really depends on the model of hoverboard. Some are advertised as being water resistant and can even be driven over puddles, while others are not meant to get wet at all. Water damage is a risk with any electronic device, so it’s important to know the capabilities of your particular board.

What if my Hoverboard does get wet?

If your hoverboard does get wet, the first thing you should do is turn it off and unplug it. Then, remove the battery and any other removable parts. Once everything is dry, you can reassemble the hoverboard and try to turn it on again. If it doesn’t work, you may need to replace some of the parts that were damaged by the water.

Water resistance ratings:

Some boards may survive a light rain shower (indicated by the hoverboard’s IP rating) and are waterproof to some extent. Some can even endure being driven over a few modest puddles, but we still advise avoiding them. The danger comes from putting the electronics and battery in water.

Water resistance is determined by the International Protection Rating, or IP rating. The higher the number, the greater the protection. Most hoverboards have an IP54 rating. This means that they can resist water spray from all directions but cannot be fully submerged.

Can I ride my Hoverboard in the rain?

It’s not a good idea to ride your hoverboard in the rain, even if it is advertised as being water resistant. Puddles can hide obstacles that can damage your board, and wet roads can be slippery and dangerous. If you must ride in the rain, be extra careful and go slowly.

Hoverboard components that gets damaged by water:

Motherboard:

The motherboard is the most crucial element in a hoverboard– turn the device off immediately and take precautions if it ever comes into contact with water. One common method is to bury the gadget in raw rice, as this works for smartphones as well. However, you will need an extraordinarily large container of rice to submerge the entire hoverboard.

Battery:

The battery is also vulnerable to water damage. If the battery compartment comes into contact with water, remove the battery and dry it off as soon as possible. Depending on the severity of the water exposure, you may need to replace the battery entirely.

Motors:

Water can cause the motors in your hoverboard to rust and seize up. Avoid driving your hoverboard through puddles, and if the motors do get wet, dry them off as soon as possible.

Wheels:

The wheels are not typically affected by water, but it is still best to avoid driving through puddles when possible. If the wheels do get wet, simply wipe them down with a dry cloth.

Is water damage covered by warranty?

Many electronics, like televisions, PC monitors, smartphones and tablets often come with some form of limited warranty. However, it’s important to note that manufacturers almost always have a clause that water damage is not covered.Most hoverboard brands have a 90-day limited If your hoverboard does experience water damage, it’s very unlikely that you will be able to get a replacement or a refund.

What to do if your hoverboard gets wet:

If your hoverboard does get wet, there are a few things you should do as soon as possible.

First, unplug the battery and remove it from the board.

Second, if possible, disassemble the board so that each component can dry separately.

Third, use a towel or cloth to soak up any water that’s pooled on the surface of the board.

Fourth, use a hairdryer on the lowest setting to dry off the hoverboard. Be sure to keep the hairdryer moving so you don’t overheat any one spot.

Once everything is dry, reassemble the board and check that all the connections are secure. Then, charge the battery fully before riding again.

How to protect your hoverboard from water damage:

There are a few things you can do to protect your hoverboard from water damage.

First, avoid riding in the rain or near bodies of water.

Second, if you must ride in wet conditions, consider getting a waterproof cover for your board.

Third, always unplug the battery and remove it from the board before cleaning or storing your hoverboard.

Fourth, store your hoverboard in a dry, cool place when you’re not using it.

Can I rely on a warranty to replace the hoverboard damaged by water?

Unfortunately, Most brands have 90-day limited warranties that do not cover water damage. So, if your board does get wet, you may have to pay for repairs or replacement out of pocket.

It’s always a good idea to check with the manufacturer to see what is and isn’t covered under your warranty. That way, you know what to expect if something goes wrong.

What this means for beginners:

For beginners, we recommend avoiding bodies of water and riding in the rain. If you must ride in wet conditions, be sure to get a waterproof cover for your board. And always remember to unplug the battery and remove it from the board before cleaning or storing your hoverboard.

FAQs

Does water damage the hoverboard:

Water damages hoverboards in a number of ways. It can rust the metal components, damage the electronics, and ruin the battery. So, it’s important to take steps to protect your hoverboard from water damage.

How long does it take for a wet hoverboard to dry:

It depends on how much water the board is exposed to and how well you can dry it off. If possible, disassemble the board and dry each component separately. Use a towel or cloth to soak up any water on the surface of the board, then use a hairdryer on the low setting to dry everything off. Once everything is dry, reassemble the board and check the connections before riding again.

How do you know if your hoverboard is waterproof:

The best way to know if your hoverboard is waterproof is to check the IP rating. The higher the number, the greater the protection. Most hoverboards have an IP54 rating, which means they can resist water spray from all directions but cannot be fully submerged.

What happens if you ride a hoverboard in the rain:

Riding a hoverboard in the rain is not recommended because it can damage the board. Water can rust the metal components, damage the electronics, and ruin the battery. So, if you must ride in wet conditions, be sure to get a waterproof cover for your board.

How do you clean a wet hoverboard:

If your hoverboard gets wet, unplug the battery and remove it from the board. If possible, disassemble the board so that each component can dry separately. Use a towel or cloth to soak up any water that’s pooled on the surface of the board. Use a hairdryer on the lowest setting to dry off the hoverboard. Be sure to keep the hairdryer moving so you don’t overheat any one spot. Once everything is dry, reassemble the board and check that all the connections are secure. Then, charge the battery fully before riding again.

Do hoverboards explode:

Hoverboards can explode if the battery is damaged or faulty. So, it’s important to take steps to protect your board from water damage. Avoid riding in the rain or near bodies of water, and unplug the battery and remove it from the board before cleaning or storing your hoverboard. Store your hoverboard in a dry, cool place when you’re not using it.

Hoverboard got wet and won’t turn on or off- what to do:

If your hoverboard gets wet and won’t turn on or off, unplug the battery and remove it from the board. If possible, disassemble the board so that each component can dry separately. Use a towel or cloth to soak up any water that’s pooled on the surface of the board. Use a hairdryer on the lowest setting to dry off the hoverboard. Be sure to keep the hairdryer moving so you don’t overheat any one spot. Once everything is dry, reassemble the board and check that all the connections are secure. Then, charge the battery fully before riding again.

How is it like riding a hoverboard on wet pavement?

Riding a hoverboard on wet pavement is not recommended because it can damage the board. Water can rust the metal components, damage the electronics, and ruin the battery. So, if you must ride in wet conditions, be sure to get a waterproof cover for your board.

Wrapping it up

In conclusion, whether or not a hoverboard can get wet depends on the model. Some are resistant to water and can even be driven over puddles, while others are not meant to get wet at all. Water damage is a risk with any electronic device, so it’s important to know the capabilities of your particular board. If your hoverboard does get wet, the first thing you should do is turn it off and unplug it.

Then, remove the battery and any other removable parts. Once everything is dry, you can reassemble the hoverboard and try to turn it on again. If it doesn’t work, you may need to replace some of the parts that were damaged by the water. It’s not a good idea to ride your hoverboard in the rain, even if it is advertised as being water resistant.